Chung Metal supplies Hastelloy B2 Bars and Rods, yet another nickel‑molybdenum alloy maximized for hydrochloric acid resistance and other reducing acid environments. B2 possesses greater strength and moderate weldability with superior resistance to uniform and localized attack in reducing acids. These rods/bars find application in aggressive acid plants and chemical equipment where durability and chemical resistance are both necessary.
Comparable in composition to B3 but with differing molybdenum and trace element content to cope with particular acid strengths. Annealed tensile strength ~550‑700 MPa, yield strength moderate, elongation moderate; outstanding resistance to pitting and cracking. Density ~8.8‑9.0 g/cm³. High melting point.
| Standard | ASTM B335, ASME SB335 |
| Round Bar Size | 3mm~ 800mm |
| Square Bar Size | 4mm* 4mm ~100mm* 100mm |
| Flat Bar Size | 2mm ~ 100mm |
| Hex Bar Size | 2mm ~ 100mm |
| Angle Size | 3mm* 20mm* 20mm~ 12mm* 100mm* 100mm |
| Thickness | 50 mm to 6000 mm Long |
| Length | 1 To 6 Meters, Custom Cut Length |
| Form | Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc |
| Grade | Ni | Mo | Cr | Fe | Mn | C | P | S | Si |
| Hastelloy B2 | Bal | 26 – 30 | 1.0 | – | 0.1 | 0.02 | 0.04 | 0.03 | 0.1 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 9.2 g/cm3 | 1370 °C (2550 °F) | Psi – 1,15,000 , MPa –760 | Psi – 52,000 , MPa – 350 | 40% |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | OR | EN |
| Hastelloy C22 | 2.4602 | N06022 | – | – | NW 6022 | – | NiCr21Mo14W |
Yes, Hastelloy B2 rods can be welded. However, it requires proper techniques and filler materials to avoid cracking due to their sensitivity to heat-affected zones.
Hastelloy B2 bars offer exceptional resistance to hydrochloric acid and other corrosive environments, along with excellent weldability and high strength. They are highly resistant to pitting, stress corrosion, and localized corrosion.
Hastelloy B2 rods are available in various sizes, ranging from small diameters to larger rods, with common diameters including 0.125 inches to 4 inches. They typically come in a polished or cold-drawn finish, depending on the application requirements.
Applied in hydrochloric acid (to high concentration) applications, acid pickling, acid handling, mixing units of acid, chemical reactors, valves and piping for acid plants. Satisfactory in acid storage, pickling baths, and recovery systems. Used where reducing acids are the major constituents compared to oxidizing acids.






We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved