Chung Metal supplies Forgings of Inconel in numerous grades (e.g., 625, 617, 718, etc.) with forged components possessing high mechanical properties, strength, and reliability. Forging increases grain flow, minimizes internal defects, and enhances fatigue strength. Our forgings of Inconel are finished and heat treated with caution to fulfill stringent industrial specifications. These forged rods/bars find applications in parts experiencing high stress, temperature, or corrosive conditions, wherein strength along with corrosion resistance and oxidation tolerance is needed.
The forgings’ composition is a function of the alloy grade employed (nickel base, chromium, molybdenum, cobalt, aluminum, titanium etc.). Higher yield strength, enhanced ductility, and improved fatigue strength are offered by forged structure as compared to wrought or casting equivalents. Tensile strengths usually between 700‑1,400 MPa based on alloy and temper; yield strength comparable. Elongations are dependent on section size and processing. Good creep resistance at elevated temperatures, oxidation resistance, and corrosion resistance.
Specifications ASTM B564 / ASME SB564
Flat bar blocks up to 27″ width and 15,000 lbs.
Cylinders and sleeves up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts up to 144″ maximum length and 20,000 lbs.
Grades : Inconel 600, Inconel 601, Inconel 617, Inconel 625, Inconel 718
Post-forging operations for Inconel include heat treatment (solution annealing and aging) and machining to achieve desired properties and dimensions.
The processing method for Inconel forgings involves high-temperature forging, followed by heat treatment and machining to achieve desired properties and dimensions.
Inconel forgings require minimal maintenance, with periodic inspections for wear, stress, or surface damage to ensure continued performance.
Applies in aerospace, power generation, oil & gas, chemical processing, and marine industry for parts like shafts, couplings, turbine discs, valve bodies, fasteners, and structural components subjected to severe environments. Forged Inconel components are selected for safety-critical, high load carrying, or high temperature applications. Also used where mechanical vibrations or cyclical loading is involved, owing to the improved toughness provided by forging.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
