SS 347 has ~17–19% Cr, ~9–13% Ni, and titanium stabilizing additions (~0.5%); carbon moderate (~0.04–0.10%). Mechanical behavior: tensile strength ~585–750 MPa, yield ~205–380 MPa, elongation ~30–40%. The titanium addition avoids precipitation of carbides (sensitization) upon thermal exposure. Forging provides better toughness, finer grain structure, and higher strength.
| Standard | ASTM A182, ASME SA182 |
| Specification | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs. |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs. |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs. |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
Stainless Steel 347 forgings have limitations in extreme temperatures above 1600°F (870°C), susceptibility to stress corrosion cracking in chloride environments, and reduced formability compared to some other stainless steel grades.
The forging temperature range for Stainless Steel 347 is typically between 2100°F (1149°C) and 2200°F (1204°C). It ensures optimal grain structure and mechanical properties for high-performance applications.
Stainless Steel 347 forgings require minimal maintenance, primarily periodic cleaning to remove contaminants. Regular inspection for corrosion or wear is recommended, along with ensuring proper lubrication for moving parts in harsh environments.
Used in furnace and boiler internal components, heat exchangers, chemical processing, exhaust systems, and structural components in high temperature corrosive exposure. Also in aircraft exhaust manifolds, turbine components, piping and flanges in hostile heat. 347 forgings are the choice when thermal stability and resistance to intergranular corrosion during cyclic temperature exposure are needed.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
