Chung Metal provides Stainless Steel 347H forgings, a higher carbon version of 347 for improved creep strength at elevated temperatures. Our 347H forgings are manufactured with controlled composition, certified heat treatment, and dimensional accuracy. Power plant, petrochemical, and high heat industries trust 347H for structural and pressure components requiring long-term performance at high heat.
SS 347H is like 347 (Cr, Ni, Ti stabilized) but with increased carbon (~0.04–0.10 or somewhat greater), encouraging strength at high temperature. Tensile and yield characteristics similar or somewhat better compared to 347, particularly at creep conditions at high temperature. It has good ductility, stability, and toughness. At high-temperature exposure, it sustains structure and resists creep deformation more than common 347.
| Standard | ASTM A182, ASME SA182 |
| Specification | DIN, ASTM, BS and all International Standards |
| Flat bar blocks | up to 27″ width and 15,000 lbs. |
| Cylinders and sleeves | up to 50″ maximum O.D. and 65″ maximum length |
| Discs and hubs | up to 50″ diameter and 20,000 lbs. |
| Rolled, hand forged or mandrel forged rings | up to 84″ maximum O.D. and 40″ maximum length |
| Rounds, shafts and step shafts | up to 144″ maximum length and 20,000 lbs. |
| Forging Types | Impression Die Forging, Open Die Forging, Seamless Rolled Forging, Hot Forging, Cold Forging, Open die hammer forging, Impression die drop forging, Closed Die Forging, Press Forging, Upset Forging, Compression Forging, Swaging, Rotary Forging, Roll forging. |
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti | SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 4(C+N) – 0.70 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Yes, Stainless Steel 347H forgings can be used for potable water applications, offering excellent corrosion resistance and durability, particularly in high-temperature systems or environments with varying water quality.
Yes, Stainless Steel 347H forgings are highly suitable for high-temperature applications due to their niobium stabilization, which enhances resistance to oxidation, thermal stress, and intergranular corrosion at elevated temperatures.
Used in steam turbines, high-temperature piping, boiler headers, superheater parts, and structural supports that work under extended thermal loads. Also used in chemical plants, exhaust systems, furnace hardware, and industrial heaters. Wherever exposure to heat for prolonged periods requires reliable mechanical performance, 347H forgings are preferred to standard 347.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
