Chung Metal produces trustworthy Stainless Steel 410 Rectangular Bars, a martensitic stainless steel that is hardenable with excellent mechanical strength and wear resistance. SS 410 can be used for components that need to be highly hard, moderately resistant to corrosion, and structurally sound. The rectangular shape is ideal for machine bases, flat tools, valve plates, and wear-resistant parts. Chung Metal supplies SS 410 bars with uniform mechanical properties, clean surface finish, and close dimensional tolerance to sustain excellent performance in mechanical, construction, and general industrial uses.
SS 410 contains 11.5–13.5% chromium and approximately 0.15% carbon. It is ferromagnetic and may be heat-treated to attain hardness ranges of 40–45 HRC. Tensile strength is 700–1000 MPa, and the yield strength is 450–700 MPa. It has moderate resistance to corrosion in dry and mild conditions. The rectangular form is well-suited for flat structural pieces and precision-fit plates. Chung Metal supplies 410 rectangular bars in annealed, hardened, or tempered conditions as per your engineering needs.
Stainless Steel Rectangular Bar Specification : ASTM A276 / A479, ASME SA276 / A479
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
Yes, Stainless Steel 410 Rectangular Bars can be welded, but preheating and post-weld heat treatment are recommended for optimal results. Proper care ensures strong, durable welds.
Yes, Stainless Steel 410 Rectangular Bars are fully recyclable and can be reused without losing their quality. Recycling reduces environmental impact and promotes sustainability.
410 rectangular bars are employed in pump shafts, gears, machine supports, industrial tooling, valve plates, and wear-resistant structures. They are well-suited for machined fixtures, support blocks, and guide rails based on their hardness and strength. SS 410 is suitable for automotive parts, mechanical components, and general fabrication under dry or mildly corrosive environments. Chung Metal supplies these bars in sizes appropriate for heavy-duty machining, mechanical assemblies, and structural applications in moderate industrial environments.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
