Chung Metal offers Alloy Steel F1 Bars and Rods for process industries needing dependable performance at moderate pressure and temperature, with satisfactory strength and toughness. F1 is usually applied to general power plant tubing and piping, structure components, and in process applications. We make certain F1 stock is up to chemical, mechanical, and dimensional requirements. With reliable supply and finishes, Chung Metal’s F1 bars are preferred for cost-effective yet reliable application. F1 is utilized by customers in energy, manufacturing, and chemical processing where environment is slightly higher, but extreme high-temperature alloy steels are not required.
F1 Alloy Steel is a lower alloy steel; its composition may be similar to Cr‑Mo steels with relatively low levels of alloying (e.g. Cr ~1‑2%, Mo ~0.2‑0.5%, etc.), depending on specification. Mechanical properties: tensile strength perhaps ~450‑600 MPa, yield ~250‑400 MPa, elongation ~20‑25%. Good toughness, average hardness, and acceptable creep resistance at lower elevated temperatures. Hardening feasible through heat treatment. Weldability relatively good with proper pre‑ and post‑treatment. These are non‑supercritical service steels.
Alloy Steel Round Bar Specification : ASTM A182, ASME SA182
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
| Grade | C | Mn | P | S | Si | Ni | Ch | Mo | Cb |
|---|---|---|---|---|---|---|---|---|---|
| F1 | 0.28 | 0.60 – 0.90 | 0.045 | 0.045 | 0.15 – 0.30 | – | – | 0.44-0.65 | – |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| F1 | 485 | 275 | 20 | – | 143-192 |
| STANDARD | UNS | WERKSTOFF NR. |
|---|---|---|
| Alloy Steel F1 | K12822 | 1.5415 |
Alloy Steel F1 Bars and Rods are widely used in industries like automotive, aerospace, petrochemical, and power generation. They are perfect for applications requiring strength, durability, and resistance to high temperatures and corrosion.
Yes, we offer customization options for Alloy Steel F1 Bars and Rods, including specific dimensions, grades, and mechanical properties tailored to meet your project's unique requirements.
F1 Bars/Rods find application in normal steam pipes and tubes of power plants, supports, and structural frames. F1 is also utilized in boilers, heat exchangers, flanges, and valve bodies of water‑based systems. Moderate temperature piping and mechanical components are used in process plants with F1. Cyclic stress without severe heat can be utilized with F1. F1 finds application in manufacturing machinery, heavy duty hardware, coupling pieces. F1 is selected where cost-performance balance demands less complex alloys but strength and dependability over plain carbon steels are required.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
