Chung Metal, a well-established Vietnamese manufacturer, provides high-quality Stainless Steel 410 Round Bars/Rods, a general-purpose martensitic stainless steel that is known for its hardness, wear resistance, and high strength. SS 410 round bars are ferromagnetic in nature and may be heat-treated to improve their mechanical properties. Chung Metal manufactures these round bars to high dimensional precision and surface finish, hence appropriate for heavy-duty machinery, machining, and structural purposes. These bars are a convenient option for parts with moderate corrosion, friction, and mechanical wear. They find extensive application in various industries with demand for durability and affordability.
SS 410 is 11.5–13.5% chromium and has up to 0.15% carbon. Hardened and tempered, it offers tensile strength of 700–950 MPa and yield strength of 450–650 MPa. Elongation is normally 15–20%, and hardness can be increased considerably by heat treatment. SS 410 is magnetic and possesses moderate corrosion resistance, best suited for dry or mildly corrosive conditions. Chung Metal supplies round bars in annealed or hardened conditions based on application requirements. Its strength and toughness make it best suited for wear-prone components.
Stainless Steel Round Bar Specification : ASTM A276 / A479, ASME SA276 / A479
Dimension Standard : EN, DIN, JIS, ASTM, BS, ASME, AISI
Size : 14mm-300mm
Thickness : 50 mm to 6000 mm Long
Length : 1 To 6 Meters, Custom Cut Length
Form : Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc.
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
Type | SIZES (Inches) | ISO Tolerance | SIZES (mm) |
|---|---|---|---|
Peeled and Polished | 1.50″ to 6.00″ | h11-DIN 1013 | 40.00 to 150.00 |
Cold Drawn and Ground | 5/6″ to 2.50″ | h9-h8-h11-h10 | 10.00 to 75.00 |
Cold Drawn and Polish | 1/8″ to 3.00″ | h9-h8-h11-h10 | 3.00 to 75.00 |
Peeled and Ground | 3/4″ to 2.00″ | h10-h9-h11 | 20.00 to 50.00 |
Cut to size on request (tolerance +2/-0 mm). 410 Stainless Steel Bars Standard lengths of 2000 mm up to 6000 mm.
50.0 | 6.0 |
45.0 | 5.0 |
60.0 | 8.0 |
55.0 | 7.0 |
70.0 | 10.0 |
65.0 | 9.0 |
75.0 | 12.0 |
90.0 | 20.0 |
80.0 | 16.0 |
100.0 | 25.0 |
160.0 | 35.0 |
130.0 | 30.0 |
200.0 | 40.0 |
Cut to size on request (tolerance +2/-0 mm). Standard lengths of 904L Stainless Steel Bars 2000 mm up to 6000 mm available
5.0 | 45.0 |
6.0 | 50.0 |
7.0 | 55.0 |
8.0 | 60.0 |
9.0 | 65.0 |
10.0 | 70.0 |
12.0 | 75.0 |
16.0 | 80.0 |
20.0 | 90.0 |
25.0 | 100.0 |
30.0 | 130.0 |
35.0 | 160.0 |
40.0 | 904L.0 |
Stainless Steel 410 Round Bars/Rod generally does not require additional corrosion protection coatings, as it offers moderate corrosion resistance due to its chromium content. However, in highly corrosive environments, coatings may enhance durability.
When selecting Stainless Steel 410 Round Bars/Rod, consider factors like strength requirements, corrosion resistance, heat treatment needs, and the specific application environment to ensure optimal performance and durability.
Stainless Steel 410 Round Bars/Rod is not ideal for hygienic and sanitary applications due to its moderate corrosion resistance. For such uses, higher grades like 304 or 316 are recommended for better resistance.
410 round bars are applied to pump components, shafts, fasteners, cutlery, valves, motor parts, and surgical equipment. They find extensive applications in automotive, petrochemical, power generation, and mechanical sectors where high strength and resistance to wear are of great importance. SS 410 has consistent performance in friction-bearing applications, mechanical stress, and low-to-moderate corrosion exposure. It is also suitable for tooling, rotors, and internal machinery parts. Chung Metal provides SS 410 round rods in various diameters and lengths to cater to custom machining and structural applications in heavy and light industries.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Da Nang, Vietnam
Copyright 2024 Chung Metals. All rights reserved
